Manage stand orders
Select Option
ETCHE SECURITE sarl
ZA Ordokia,
64130
Viodos-Abense-de-Bas
France
France
Location
Hall map
Fairground map
Contact
Jean-Louis PLANTEY
Pierre François ETCHEGOYHEN
Our range of products
Product categories
- 01 Safety at work
- 01.01 Personal protective equipment (PPE)
- 01.01.08 Safety shoes
Safety shoes
- 01 Safety at work
- 01.01 Personal protective equipment (PPE)
- 01.01.16 Heat and fire-resistant clothing
Heat and fire-resistant clothing
- 01 Safety at work
- 01.01 Personal protective equipment (PPE)
- 01.01.19 Acid-resistant clothing
Acid-resistant clothing
- 03 Security at Work
- 03.04 Electrical Safety
- 03.04.03 Insulating materials
Insulating materials
- 04 Special Equipment for Disaster / Emergency Management - (which is not covered by the product categories 1-3)
- 04.03 CBRN protection
- 04.03.01 Protective equipment
Protective equipment
Our products
Product category: Safety shoes
MIC CHIMIE SA Shoes
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
EN ISO 20345 S5 SBH HRO CR AN SRC
Heel energy absorption
Antistatic
Outsole resistant to fuel oil
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
Expert certified:
Satisfies main EN 13832-2 requirements except waterproofness, only conform up to the bottom of the tongue.
EN 13832-2 K O P
Boots resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Excellent resistance to abrasion and cuts.
Comply with standards :
EN ISO 20345 S5 SBH HRO CR AN SRC
Heel energy absorption
Antistatic
Outsole resistant to fuel oil
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
Expert certified:
Satisfies main EN 13832-2 requirements except waterproofness, only conform up to the bottom of the tongue.
EN 13832-2 K O P
Boots resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Product category: Safety shoes
FIREMAN SABF Boots
Excellent resistance to heat flow, heat contact, fire.
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-1 and EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-1 and EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Product category: Safety shoes, Acid-resistant clothing
WN CHIMIE SA Waders
Perfectly waterproof, excellent insulation against the cold, light and flexible
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts (jersey both sides version)
Easily washable (shark skin version) for sewer workers.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts (jersey both sides version)
Easily washable (shark skin version) for sewer workers.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Product category: Heat and fire-resistant clothing
FIREMAN SA/BF Boots
Excellent resistance to heat flow, heat contact, fire.
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-1 and EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-1 and EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Product category: Heat and fire-resistant clothing
FIREMAN SA/BJ Boots
Excellent resistance to heat flow, heat contact, fire.
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Excellent resistance to chemicals : fuels, oils, weak and diluted acids, solvents.
Excellent resistance to abrasion and cuts
Used with chemical protective suits (satisfy permeation tests according to EN 943-2).
Comply with standards :
EN 15090 type 3 HI3
Boots for emergency situation and fire with toxic chemicals emission.
EN ISO 20345 S5 HRO SRC
Heel shock absorption.
Antistatic.
Resistance to heat contact (HRO).
EN 13832-3 J P Q
Boots highly resistant to chemicals :
N-Heptane (J)
Hydrogen peroxide (P)
Isopropanol (Q)
Product category: Acid-resistant clothing
HYPALON SA Boots
Excellent resistance to corrosive chemicals, particulary to concentrated and hot acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
EN ISO 20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
EN ISO 20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 B L M N
Boots highly resistant to chemicals :
Acetone (B)
Sulfuric acid (L)
Nitric acid (M)
Acetic acid (N)
Product category: Acid-resistant clothing
CHIMIE SA Boots
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Excellent resistance to abrasion and cuts.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Product category: Acid-resistant clothing
NEOPRENE SA Boots
Excellent resistance to acids, fuels and solvents.
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
EN ISO 20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 J Q R
Boots highly resistant to chemicals :
N-Heptane (J)
Isopropanol (Q)
Sodium Hypochlorite(R)
Excellent resistance to abrasion and cuts.
For use with protective clothing in hostile environments.
Comply with standards :
EN ISO 20345 S5 HRO CR SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
EN 13832-3 J Q R
Boots highly resistant to chemicals :
N-Heptane (J)
Isopropanol (Q)
Sodium Hypochlorite(R)
Product category: Acid-resistant clothing
MIC CHIMIE SA Shoes
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts.
Comply with standards :
EN ISO 20345 S5 SBH HRO CR AN SRC
Heel energy absorption
Antistatic
Outsole resistant to fuel oil
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
Expert certified:
Satisfies main EN 13832-2 requirements except waterproofness, only conform up to the bottom of the tongue.
EN 13832-2 K O P
Boots resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Product category: Insulating materials
DIELECTRIC Boots
Electrically insulated boots that protect workers from risks of pace voltage when there is a line-to-ground voltage fault during an intervention on alternative current 1000V nominal voltage power supply network.
Made of dielectric rubber.
Individually tested.
Comply with standards :
EN 50321 class 0
Individually tested under alternatign voltage of 10 000V according to ENEL specification
EN ISO 20347 OBE HRO SRC
Basic requirements (OB)
Heel energy absorption (E)
Contact heat resistance (HRO)
Made of dielectric rubber.
Individually tested.
Comply with standards :
EN 50321 class 0
Individually tested under alternatign voltage of 10 000V according to ENEL specification
EN ISO 20347 OBE HRO SRC
Basic requirements (OB)
Heel energy absorption (E)
Contact heat resistance (HRO)
Product category: Insulating materials
DIELECTRIC E Boots
Electrically insulated boots that protect workers from risks of pace voltage when there is a line-to-ground voltage fault during an intervention on alternative current 1000V nominal voltage power supply network.
Made of dielectric rubber.
Individually tested.
Comply with standards :
EN 50321 class 0
Individually tested at 10 000V
EN ISO 20345 SBE HRO SRC
Basic requirements (SB)
Heel energy absorption (E)
Contact heat resistance (HRO)
Made of dielectric rubber.
Individually tested.
Comply with standards :
EN 50321 class 0
Individually tested at 10 000V
EN ISO 20345 SBE HRO SRC
Basic requirements (SB)
Heel energy absorption (E)
Contact heat resistance (HRO)
Product category: Protective equipment
NRBC / CBRN SA Boots
Without lining, easily washable and decontaminableRecommended for asbestos removal
Impermeable to mustard gas (yperite) during 8h according to liquid SD test at 37°C (10g/m²)
Excellent mechanical, chemical and thermal resistance
With steel safety elements (toe-cap and anti-perforation mid-sole)
Comply with standards :
EN ISO 20345 SBP HRO FO SRC
Basic requirements (SB)
Perforation resistant (P)
Contact heat resistance (HRO)
Resistant to fuel oil (FO)
Impermeable to mustard gas (yperite) during 8h according to liquid SD test at 37°C (10g/m²)
Excellent mechanical, chemical and thermal resistance
With steel safety elements (toe-cap and anti-perforation mid-sole)
Comply with standards :
EN ISO 20345 SBP HRO FO SRC
Basic requirements (SB)
Perforation resistant (P)
Contact heat resistance (HRO)
Resistant to fuel oil (FO)
Product category: Acid-resistant clothing
CN CHIMIE SA Thigh Waders
Excellent resistance to chemicals : fuels, oils, greases, solvents, weak and diluated acids, phytosanitary products.
Excellent resistance to abrasion and cuts (jersey both sides version).
Easily washable (shark skin version) for sewer workers.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
Excellent resistance to abrasion and cuts (jersey both sides version).
Easily washable (shark skin version) for sewer workers.
Comply with standards :
EN ISO 20345 S5 HRO CR AN SRC
Heel energy absorption.
Antistatic.
Contact heat resistance (HRO)
Cut resistance (CR)
Ankle protection (AN)
EN 13832-3 K O P
Boots highly resistant to chemicals :
Sodium Hydroxide(K)
Ammonia Solution (O)
Hydrogen Peroxide (P)
About us
Company details
Today, ETCHE SECURITE manufactures technical rubber safety boots, shoes, waders and thigh waders to protect the professionals.
All our products are manufactured on a single site by experienced personnel. It is this control, from the design to the production stage, which enables us to develop innovative products and guarantee the quality of this Individual Protection Equipment (IPE).
The design, production and inspection of the rubber mixes, linings and boot mouldings are monitored by an ISO 9001 certified quality system.
The company is the specialist for rubber boots for firemen, the chemical industry, electrical protection, NRBC, etc. and exports over 60% of its production to a network of specialist distributors in around 30 countries.
ETCHE SECURITE also supplies several armed forces, the merchant navy and the French Navy, as well as a large number of protective suit manufacturers.
All our products are manufactured on a single site by experienced personnel. It is this control, from the design to the production stage, which enables us to develop innovative products and guarantee the quality of this Individual Protection Equipment (IPE).
The design, production and inspection of the rubber mixes, linings and boot mouldings are monitored by an ISO 9001 certified quality system.
The company is the specialist for rubber boots for firemen, the chemical industry, electrical protection, NRBC, etc. and exports over 60% of its production to a network of specialist distributors in around 30 countries.
ETCHE SECURITE also supplies several armed forces, the merchant navy and the French Navy, as well as a large number of protective suit manufacturers.