Manage stand orders
Select Option

Matcon BV

Insulindeweg 15, 1462 MJ Middenbeemster
Netherlands
Telephone +31 299 684468
Fax +31 299 684374
info@matcon.com

Hall map

A+A 2019 hall map (Hall 6): stand F36

Fairground map

A+A 2019 fairground map: Hall 6

Our range of products

Product categories

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.13  Chemical protection suits

Chemical protection suits

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.14  Disposable clothing

Disposable clothing

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.15  Protective garments made of rubber

Protective garments made of rubber

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.19  Acid-resistant clothing

Acid-resistant clothing

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.25  Full protection suits

Full protection suits

  • 02  Health at work
  • 02.02  First aid, rescue
  • 02.02.02  Eye irrigation

Eye irrigation

  • 02  Health at work
  • 02.02  First aid, rescue
  • 02.02.07  Emergency showers

Emergency showers

  • 02  Health at work
  • 02.04  Hygiene and sanitary supplies
  • 02.04.01  Disinfectants, disinfection equipment

Disinfectants, disinfection equipment

  • 02  Health at work
  • 02.04  Hygiene and sanitary supplies
  • 02.04.02  Showers

Showers

  • 04  Special Equipment for Disaster / Emergency Management - (which is not covered by the product categories 1-3)
  • 04.04  Decontamination
  • 04.04.02  Portable decontamination systems

Portable decontamination systems

  • 04  Special Equipment for Disaster / Emergency Management - (which is not covered by the product categories 1-3)
  • 04.04  Decontamination
  • 04.04.03  Decontamination equipment

Decontamination equipment

Our products

Product category: Eye irrigation

MB 50

The MB 50 Eyebath / Face Wash Fountain has an “unbreakable” ABS bowl and hinged lid (including sign), suitable for indoor use and wall mounting. The lid is at the same time the operation of the Eyebath (pull forewards down and the water starts running). When the lid is pushed back and closed the eyebath stops automatically. Because of this hinged lid the Eyebath remains clean and hygienic. The Eyebath is equipped with diffusers (optional supplemented with black rubber Eye cups). These diffusers give a gentle aerated soft spray pattern which feels pleasant for the eyes. A drain is present on the bowl. Also a Flow regulator is present on the unit in order to achieve a good spraying pattern. The Eyebath can have an option that the Eyebath drains empty after usage. The MB 50 can also be made completely out plastic without any metal parts, this means also the operation valve, drain, diffusers, etc.. Minimum water pressure is 2 bar.

Specifications: 
  • Water connection: 15 mm compression fitting or ½” BSP Male or 12 mm "Push / Speed - Fit" or different on your request water
  • pressure 2 bar
  • water supply: 12 liter per minute
  • manual operation by means of the lid
  • flow regulator
  • filters
  • sign
  • dimensions 370x300x300 mm (WxDxH)
  • wall mounting
  • meets the following standards: CE EN 15154 & ANSI Z 358.1

Extra options: 
  • foot pedal
  • automatic drain
  • proximity switch
  • automatic flushing unit
  • light
  • sign
  • hand shower
  • heater
  • black rubber eye cups
  • can be produced entirely out of plastic
  • Y-strainer filter
  • mixing valve
  • more options on request

More Less

Product category: Emergency showers

MB 150

The MB 150 Emergency Safety Shower / Body Shower or Drench Shower / Deluge Shower suitable for indoor use. This model has a 1¼” BSP standpipe and floor mounting plate. Standard we have a bottom water inlet, but this can be changed to any position you require. Special Shower head (spray angle 60° and gives rotation to the water) for an effective and efficient operation. Stainless Steel operation Pull rod for activation. Floor mounting plate 230 x 230 mm and with 4 connection holes ( Ø 15 mm) H.t.H. 180 mm. Minimum water pressure is 2 bar. 

 

Click on the blue button to see a unique and detailed interactive 3d model of the MB 150 serie. With this you can have a 360 degrees view of the MB 150 series and the most relevant product options. Other shower models are also available in 3d.

 Specifications:
  • Water connection: 1¼” BSP Female or different on your request
  • water pressure 2 bar, Water supply: 60 or 80 liter per minute
  • manual operation
  • bottom of standpipe can be water supply or drain
  • color: different colors
  • material: galvanized steel (possible with coating), Stainless Steel, brass, plastic
  • Floor mounting plate 230x230 mm, holes 4xø15 mm H.t.H. 180 mm
  • meets the following standards: CE EN 15154 & ANSI Z 358.1
Extra options:
  • foot pedal
  • proximity switch
  • automatic flushing unit
  • cabin / booth
  • flow regulator
  • filters
  • light
  • sign
  • hand shower
  • heater
  • Y-strainer filter
  • mixing valve
  • extra hip / body nozzle
  • eyebath
  • panel type foot control
  • more options on request

More Less

Product category: Chemical protection suits

Chem 200 Splash Suit

The Chem 200 Splash Suit is a chemically resistant two-piece work suit that includes a jacket and bib trousers. It is designed to protect user and breathing apparatus equipment against chemical emergencies where gas-tight protection is not necessary.

Much attention is put into the design in order to comfort the user, movements within the suit are unlimited. It is possible, for example that the user takes his / her arms out of the sleeves, for example in order to adjust the self-contained breathing apparatus or to take notes.

The suit is equipped with a flexible 0.75mm soft visor and offers a wide panorama view. Alternatively, there may be a semi-rigid anti-fog visor placed.

The suit is made in a universal design with the hip belt provides support so that for each person the suit is pleasant. The suit can be equipped with a connection for an alarm system, and lamp line. An external air connection can be attached to the suit to realize an external air connectiong during decontamination procedures.

Just like the Chem 100 the suit can be put on quickly, which makes it possible to start the response immediately.

All suits contain sufficient exhalation valves.

This suite allows for quick donning.

Specifications: 
  • glove interchangeable system
  • unique Matcon cuff system
  • meets CE requirements
- EN 14605 type 3 PB [3] and type 4 PB [4]
- EN 340

Extra options: 

materials
- PVC
- anti static and flame retardant PVC
- Neoprene
- Butyl
- Hypalon / Neoprene / Butyl
- Viton Butyl on Polyester
- Mat Tech
- etc.

zipper options
- plastic zipper with double guide with overflap
- metal zipper with single guide with overflap
- liquid-tight zipper

leg options
- plain leg
- elasticatedated inner leg with elasticated strap and a straight outer leg
- elasticated inner leg with elasticated strap and an elastic outer leg
- sock-option with straight outer leg
- sock-option with elasticated outer leg
- solid vinyl safety boots S5 with steel toe cap and midsole which are permanently attached to the suit
- boots can be fixed to the suit

More Less

About us

Company portrait

About Matcon
Matcon originated on January 1, 1978 by taking over another company that had over thirty years experience in the field of Non-Destructive Testing (NDT) and Security technology. The latter means more than sixty (60) years experience in aiming to reach a satisfied customer!


Production of Security Emergencyshowers + Safetyshowers & Eye / Face Shower has since that time been further developed and we can say that the entire program is available from us.


The demand for safety continues and Protective Clothing (Gas tight suits, Splash suits, Chemical suits, Chemical work wear (jackets, trousers, overalls / one piece suits, aprons, etc.) Air supplied clothing (Hoods, Half suits, complete suits) we have in our program.

The origin never lost sight and the program for Non Destructive Testing has never been so complete. These include for example Penetrant or magnetic inspection systems, as well as Eddy current Ultrasonic and X-Technology is present in our program.


Furthermore, we provide Hardness Testers, Endoscopes, Fibre Copen, video probes and a wide range of optical instruments.

You should see the products mentioned in a widest possible perspective and is subject to a continuous progress in the field of demand and technical progress. It will be clear that "development" is very important to us.


Matcon produces under a system in accordance with NEN-EN-ISO 9001.